CAD and drawings
Request current CAD files
Ask for current dimensions, platform clearances, drawing guidance and the information your designer or builder needs before committing to a layout.
For planners, architects and builders
Car turntable CAD, specifications and planning guidance.
Use this page for early scoping, then request current drawings, cost guidance and specifications from Car Turntable before final project decisions.
Suitability
Check driveway conditions
Confirm surface type, grade, drainage, services and turning path before assuming a turntable will suit the site.
Specification
Talk through capacity
Match the platform diameter, load rating, controls and servicing expectations to the actual vehicle use case.
Product overview
Typical product summary for Australian car turntables
Car Turntable is a low-profile, surface-mounted vehicle turntable for homes and selected light commercial sites where reversing is unsafe, driveway access is tight, or excavation is not the preferred starting point.
The system is intended for suitable existing or planned hardstand areas, including concrete or asphalt surfaces that can be reviewed for condition, levels, drainage and vehicle loads. It is commonly considered for steep driveways, narrow frontages, tight garages, premium renovations and projects where a forward-facing exit improves daily safety.
Early planning details
- Surface-mounted platform concept for suitable hardstand areas
- Approx. 47 mm low-profile drive-on platform
- Standard listed capacity of 3,000 kg, with custom heavy-duty options available up to 6,000 kg
- Manual control box, wireless remote and smartphone app operation options
- Useful for homeowners, architects, builders and driveway access planning teams
- CAD files, clearance guidance and project drawings available on request
For best results, request drawings before finalising the driveway layout, garage opening, electrical location or landscaping levels.
Specification checklist
Confirm before specification
Before a vehicle turntable is specified, the project team should confirm the site conditions that affect fit, installation, operation and long-term servicing. A short suitability check early in the project can prevent expensive redesign later.
Information to collect
- Site surface: concrete, asphalt, new slab or other hardstand type, including condition and thickness if known
- Driveway geometry: available turning diameter, slope or grade, approach angle, surrounding levels and drainage falls
- Vehicle details: make/model, wheelbase, estimated weight, EV or SUV load considerations and everyday use pattern
- Clearances: garage opening, walls, gates, kerbs, landscaping, street boundary and pedestrian paths
- Services and controls: power access, control-box location, remote/app preference and any underground services
- Project timing: whether pricing, CAD files, builder coordination or a site conversation is needed next
Send photos, driveway measurements, slope information and vehicle details through the enquiry form so Car Turntable can guide the right next step.
Quick reference
Early-stage cost, capacity and installation planning table.
For a firmer car turntable price, send your site details and vehicle requirements through the enquiry form.
Starting priceFrom $19,000 AUD
Standard capacity3,000 kg
Custom capacityUp to 6,000 kg
Platform styleSurface-mounted car turntable
ProfileUltra-low profile, approx. 47 mm
OperationControl box, remote and smartphone app
DocumentationCAD files and drawings available on request