A tight driveway needs enough space for the vehicle to approach the turntable, rotate without contacting obstacles and leave in the intended direction. The platform diameter alone does not tell you whether the layout will work. Start with the vehicle dimensions, a measured site plan and current product drawings, then ask Car Turntable to review the proposed arrangement before you finalise it.

This checklist is for an early planning conversation. It does not establish a minimum clearance or confirm that a particular driveway is suitable.

Concept illustration of a car on a circular turntable with surrounding driveway rotation space.
Concept illustration of vehicle rotation space. Not a product drawing; confirm clearances for your vehicle and site.

Platform size and vehicle clearance are different questions

The platform supports the vehicle, but the vehicle body can extend beyond it. As the vehicle rotates, its front, rear and corners move through the surrounding space. A wall that looks clear when the car faces the garage may be in the way partway through the turn.

Ask for a drawing that shows the proposed platform position and the space the intended vehicle occupies throughout the required rotation. Do not use a platform outline as a substitute for checking the vehicle movement.

Start with the vehicles you actually use

Provide the make, model and variant of each vehicle that needs to use the turntable. Include manufacturer dimensions and relevant load information where available. Mention accessories or modifications that change the vehicle outline, such as a towbar or rear-mounted carrier.

If you expect to change vehicles, explain that now. A layout reviewed for one car should not be assumed to suit a longer or differently shaped replacement. Ask the team which vehicle and load assumptions the proposed product and drawings use.

What should your driveway plan show?

A clear, annotated sketch can help start the enquiry if formal drawings are not available. Label approximate measurements as estimates and identify anything that still needs checking.

  • Available space: the driveway boundaries, garage opening and the proposed platform position, with dimensions where available.
  • Fixed obstacles: walls, fences, columns, steps, retaining structures, landscaping and other items near the vehicle path.
  • Moving obstacles: gate and door openings, including how they relate to the proposed vehicle movement.
  • Levels and surface: the surface type, known changes in level or slope, drainage points and any visible surface concerns.
  • Vehicle route: where the vehicle enters, its intended stopping position and how it leaves after rotating.

Add photographs looking towards the garage and back towards the street, plus views of any narrow points. Photos help explain the layout, but they do not replace measurements or a site-specific assessment.

Check the approach as well as the turning area

A vehicle needs to reach the proposed position before it can rotate. Discuss the approach path, garage and gate openings, changes in level and underbody clearance with the team. A plan that shows room for rotation can still leave unanswered questions about getting onto and off the platform.

Keep pedestrian access and normal use of gates and doors in the planning conversation too. Ask your designer or builder to resolve these alongside the vehicle layout, rather than treating the turntable as an isolated circle on the plan.

When should you request CAD drawings?

Ask for current drawings before the driveway, garage layout or related work is finalised. Explain whether the enquiry concerns an existing driveway, renovation or new build, and which decisions depend on the drawings. Confirm the drawing revision, proposed product and any assumptions that remain subject to review.

For project coordination, read what builders should confirm before specifying a turntable. If slope is a concern, include it in your enquiry and read our steep driveway planning discussion; do not infer an allowable gradient from a general article.

Prepare a useful Car Turntable enquiry

Send your project location, vehicle details, plan and photographs, then ask which further measurements or assessments are needed. State whether you need layout guidance, current CAD drawings or pricing. Our quote-request checklist explains the scope questions to ask when comparing prices.

Car Turntable has manufacturing backing from TubeTech in Melbourne. Keep product and site questions with the Car Turntable team: send your driveway details or review the technical resource information before preparing your enquiry.